€999,00
| /
DDW-ANY-01
The wide double drawer is the large base module of our line of pure storage space.
It is easy to install and can fit quite a bit of gear without compromising your trunk space.
The sturdy aluminum frame contains both drawers and keeps them safe and contained. It also helps you to neatly store the module when you don't need it in the car.
The sliders have shock absorbers when closing and both drawers are lockable with a set of 2 keys.
As for all our modules, the panels are made of Dibond and the drawers are made of Scandinavian marine birch plywood finished with polyurethane coating for durability.
Production time is between 21 and 28 days.
This one and all our modules are designed and made in ITALY.
Specs
Any vehicle, Jeep JKU, JK, Ford Bronco
External 980mmW x 200mmH x 640mmL
Internal 385mmW x 120mmH x 610mmL
Jeep JLU, JL, Jeep 4XE, Jeep 392, Suzuki New Jimny, MB G-Wagon
External 950mmW x 200mmH x 620mmL or 980mmW x 200mmH x 620mmL
Internal 355mmW x 120mmH x 590mmL or 385mmW x 120mmH x 590mmL
LR New Defender 110
External 950mmW x 200mmH x 620mmL
Internal 375mmW x 120mmH x 590mmL
Ineos Grenadier
External 980mmW x 200mmH x 700mmL
Internal 385mmW x 120mmH x 670mmL
Toyota LC 120 Prado, Toyota LC GR76, Porsche Cayenne 957, Nissan Patrol GR Y61
External 980mmW x 200mmH x 800mmL
Internal 385mmW x 120mmH x 770mmL
Weight: 30kg-50kg
Features
- Aluminum profile frame for max strength and durability
- Shock absorbing slides with 45kg max load
- 15mm marine birch plywood
- Available Raptor finishing for rugged look, toughness and easy-clean
- Aluminum laminated (Dibond) side and top panels, UV and water resistant
- Pop-up locks with 2 keys
Anchoring
Straps and anchors without platform - we provide the kit to fit it and secure it into any vehicle that has 4 anchor points in the trunk. You do not need a platform for this.
With platform - we provide the kit to secure the standard dimension module into the chosen vehicle that has its dedicated platform (sold separately here).
Notes
You can mount the stacked double drawer module on its own with anchors and straps or bolt it on one of our base systems which bolts into your vehicle.
Jeep (JLU, 4XE, 392), New Defender, owners: Because the Jeep JLU's trunk is narrower and shorter than the Jeep JKU, we had to redesign the modules reducing some of the sizes and adjusting the dimensions of the JLU platform (see it here). Depending on the configuration with our platform system and other modules, the correct width will be assigned for production.
New Defender owners: we utilize a thinner aluminum extruded profile for the construction of the drawers. External sizes are reduced by 20mm while internal dimensions remain unchanged.
FAQ
Q: Does the double wide drawer module come assembled?
A: Yes, all our modules are shipped already assembled with the necessary kit to install it.
Q: What can I fit into the drawers?
A: You can fit 1,5lt bottles sideways, butane gas tanks, most of the common camping gear available on the market.
Q: How do the drawer's partitions work?
A: The partitions can be moved to create smaller area within the drawer. They leave room to run cables from the front of the drawer to the back and also out form the back.
Q: How can I use the top of the module?
A: The top of the drawer can be use to store additional gear and it holds up to 80kg of weight. The top panel is slightly lower than the contour and that helps to keep bags and boxes from moving around.
Q: Can I connect this module to other Tailgate Gear modules?
A: Sure. Our modules are stackable and can be connected as combos to each other. Make sure you specify in the order's notes that you need a connecting kit if you already own one of our modules.
Q: Do you customize sizes?
A: We do customize our modules. There are additional charges based on the modifications and the production time may increase.
Q: How can I check if the module fits in my vehicle?
A: Check the external dimensions of the drawer and measure your vehicle. Make sure you take into account the inclination of the rear seats if you need to place it close to them.
Got more questions? Leave a message on our Contact page.
Customer Reviews
Have to say off the bat I am very satisfied with the product and service from Stefano.
I have a 2 door 2019 Jeep Rubicon and trying to find a supplier that makes parts for a 2 door is a nightmare. Tailgate not only makes a platform base for my Jeep but were prepared to custom build a wide draw unit that is longer than standard. This unit goes all the way to the seat backs.
Fit and finish are excellent and comms about build time and delivery were outstanding.
As we are now out of the EU I won’t dwell on import tax and VAT but they must be factored in if buying in the UK.
Installation takes just a few minutes, after working out how to remove the drawers, and takes initially 2 people. This is more about the size than the weight. For the price, perhaps would have been nice to include an Allen key due to space constraints. I ended up cutting one of mine to fit the space.
Overall, a great fitting product, mated to the specific platform.
Now in discussion about a bespoke fridge slider but that’s another post.
Tailgategear installed the double drawer module in my 2022 JL 4xe, combined with a prototype sleeping platform for the 4xe, also designed by Tailgategear. Love the combination so far, very sturdy design with lots of storage space, no rattles (also on the alpine roads I mostly use), and perfect for a good nights sleep in the 4xe for two persons and a dog. Working with Stefano was a pleasure, and I can highly recommend both the company and the solution Stefano came up with.