MADE IN ITALY - SHIPPING WORLDWIDE

| /

ALU-HDC-2015-FULL-BB


QUINTESSENTIALLY OVERLANDING

Overlanding is the type of long-distance adventure travel that involves driving a vehicle, usually a 4×4 off-road vehicle or truck, to remote and often rugged destinations.

The combination of a pick-up truck and a canopy camper is the perfect solution for traveling, exploring and living the outdoors.

We have devised an interior setup for the world famous Alu-Cab Canopy and ModCap Camper that turns the empty living quarter into a functional, sturdy and flexible space for solo travellers, couples and even families with children.

AVAILABLE FOR

Toyota Hilux Double Cab · Revo
Toyota Hilux Double Cab · Vigo
Toyota Hilux Extra Cab · Revo
Toyota Hilux Extra Cab · Vigo
Toyota Land Cruiser 79 · Double cab
Toyota Land Cruiser 79 · Single Cab
Ford Ranger Double Cab · 2022+
Ford Ranger Double Cab · T6
VW Amarok Double Cab · 2022+
Jeep Gladiator
Isuzu D-Max · Double Cab
Isuzu D-Max · Extra Cab
Nissan Navara · D23 Double Cab
RAM 1500 · Gen 4 Crew Cab
RAM 2500 · Gen 4 Crew Cab · 6′4″

NOTE: Not all vehicles/models are present in the image gallery. The sets are however available to order.

WHAT'S INCLUDED

Each setup is custom-designed for your vehicle and includes:

  1. Platform – Pre-drilled for installation; excluded from the Drive-Off.
  2. Double Drawer Module – Two drawers; one in the Drive-Off.
  3. Webasto and Electrical Housing Module – Top-hatch and front access; storage only in the Drive-Off. Batteries and webasto units  not included.
  4. Left Storage Module – Top-hatch access.
  5. Right Storage Module – Top-hatch access.
  6. Movable Top Panel – Includes the vertical separator.

We neither resell nor install Alu-Cab products. To purchase a ModCap or Canopy Camper, contact an Alu-Cab dealer.

Batteries and webasto units are not included.

The Base Set is always compatible with the Alu-Cab Kitchen mounted on the door. 

AVAILABLE OPTIONS

Several add-ons are available to complement the Base Set:

  1. Fridge and Cargo Slide – Slides toward the entry for easy access and tucks away when not in use.
  2. Comfort Version with Cushions – 6 cm high-density foam with washable, water-repellent covers.
  3. Lagun Table – A versatile surface for work, meal prep and dining. Converts to a flat panel, with a matching cushion when ordered with the Cushion Set.
  4. M.O.L.L.E. Panel – Entryway storage using the original PALS geometry.
  5. Carpeting – Automotive-grade tufted carpet tailored to the central space.
  6. Upper Cabinets – Extra overhead storage for everyday essentials.

Our Tailgate Table is also available for the Alu-Cab Canopy Camper door.

The upper cabinet set for the Land Cruiser 79 Single Cab is larger and includes a sink and a drawer.

VERSIONS

Two versions are available for our sets and you can select them after selecting the vehicle. Matching options and add-ons are available for both.

Bamboo & Black - a warmer look&feel and the same strength. Tough, premium bamboo for paneling, drawers and table. Dedicated coatings and finishes. Powder-coated extruded aluminium profiles. 

Black & Silver - our classic combo combining a more industrial look with the proven construction and durable materials. Baltic marine birch, U-Pol Raptor coating. 

YOUR 5 MOST ASKED QUESTIONS

Based on 2000+ emails and countless conversations

Will the interior fit my vehicle and Alu-Cab camper?

Our interiors are designed for specific vehicle and camper combinations. Select your vehicle, model year and cab configuration before choosing your finish and options.

If your vehicle is not listed—or has a different bed length, hybrid powertrain or modified load bed—contact us before ordering. Send your vehicle details, exact Alu-Cab model and photographs so we can check compatibility. Custom adaptations may be possible following a technical review.

What is included—is this a complete camper with heating and electrics?

Our product is the Tailgate Gear interior furniture system. The Alu-Cab Canopy Camper, ModCap, awning, shower cube, and other products need to be purchased separately by Authorised Reseller.

The standard vehicle-mounted Base Set includes the platform, drawer and storage modules, heater/electrical housing module, and movable centre panel with separator. The Drive-Off version has a different configuration.

The heater/electrical module provides space for equipment; it does not include a heater, battery, wiring or plumbing. Cushions, fridge slide, tables and upper cabinets are optional additions. The fridge itself is not included.

Can you install it, and can the modules be removed later?

Yes. We install Tailgate Gear interiors at our workshop in Udine, northern Italy, or ship pre-assembled modules with installation hardware and instructions for fitting by you or your chosen workshop.

For standard vehicle-mounted sets, the supplied platform is secured to the load bed and the modules bolt onto it. Installation normally requires drilling for the platform fixings.

Allow approximately one working day for furniture installation at our workshop, with the appointment agreed in advance. The modules can subsequently be unbolted and removed; leaving the platform installed makes removal and refitting easier.

We do not install the Alu-Cab camper itself or carry out electrical and plumbing installations.

Will my fridge fit, and does the furniture work with the Alu-Cab kitchen and water tank?

The standard layout accommodates selected compact fridges beneath the centre panel. Fridge capacity in litres alone does not confirm compatibility: height, width, lid opening and the slide arrangement all matter.

Send us the exact fridge model before ordering, especially if you already own a larger unit. An adapted layout may be possible, but it can change storage, seating or the ability to lower the table into a flat surface.

Our standard layouts are designed to accommodate the Alu-Cab rear-door kitchen and internal water tank. Please tell us which accessories you have so we can check your complete configuration.

How far in advance should I order, and can you ship to my workshop?

Please allow approximately 5–6 weeks for production, plus shipping time. Timing depends on the selected configuration, custom work and our production schedule, so contact us before booking travel or installation.

We ship the pre-assembled modules on a pallet to your address or chosen workshop, including international destinations. Shipping is charged separately. For destinations without an online shipping rate, send us your configuration and delivery postcode for a quotation.

For deliveries outside the EU, applicable import taxes and duties are additional.

SCROLL DOWN FOR MORE FAQs

Seating (Comfortably) & Chilling

TOP VIEW - NO CUSHIONS

Your Base Set, in Bamboo & Black or in Black & Silver, to organize the interior space. Easy access to the hatches. Ready for the add-ons.

TOP VIEW - COMFORT OPTION

Add the Cushion Set on the seating area to the Base Set, in Bamboo & Black or in Black & Silver, to increase your comfort in the camper. 

TOP VIEW - TABLE DOWN

Add the Lagun Table to also expand the comfort area by lowering it. Place the matching cushion and create a larger space for you to chill or kids to sleep.

Bamboo & Black Structure

For those who prefer a warmer, more natural look, this premium version combines bamboo surfaces with a strong, powder-coated aluminum frame, balancing comfort, durability and everyday practicality.

The bamboo is treated with an anti-mold coating to help protect it in humid climates. It is also easy to maintain: minor surface scratches can be restored with hydro oil, keeping the finish looking its best over time.

Like all our products, this setup is built for strength and long-lasting use and backed by our global warranty, giving you peace of mind wherever your travels take you.

Optional Upper Cabinets provide extra work and storage space and are available for both the bamboo and standard versions.

Note: The flat bars covering the module profiles, with or without the Tailgate Gear logo, are not included.

SEE IT IN ACTION

FAQ

DO THE MODULES ALSO FIT THE LATEST ALU-CAB MODCAP MODELS?

Yes, our modules are designed to fit inside the ModCap Camper, the ModCap Family, the ModCap Compact Camper and the classic Canopy Camper.

WHICH VEHICLES CAN THIS SETUP FIT IN?

If you already have (or are thinking about) a pickup equipped with the Alu-Cab Canopy Camper, we can fit it out with one of our setups.

Currently we have measured and designed combos for Toyota Hilux (DC&XC), Jeep Gladiator, new VW Amarok, new Ford Ranger (Raptor included), Nissan Navara, Isuzu D-Max and RAM 1500. If you don't see your vehicle in the list get in touch with the form below.

IS DRILLING REQUIRED?

This setup requires drilling to install rivnuts in the load bed to secure the platform onto which the modules are installed.

HOW CAN I HAVE IT INSTALLED?

We can install it for you at our location in Italy or we can ship it over to your preferred location or trusted workshop.

This setup requires a few tools and a little space near the vehicle to organise the modules, but it can be performed by one person.

DO YOU HAVE DEALERS WHERE I CAN HAVE THIS SETUP INSTALLED?

Yes, depending on the country where you  need the setup done, we can recommend a specialised dealer close to you. You can look on our Dealers Page to find out if one of them is located near you.

If you are not based near one of our dealers and prefer to get installed by us, do not hesitate to contact us.

WHAT'S INCLUDED IN THE PRICE?

The price includes the platform system; the four (4) modules: double drawer, webasto/electrical module, two storage modules, movable panel(s), Lagun table option (if selected), the cushions (if selected); the installation guide; the installation toolkit.

Fridge, fridge slider, webasto, electrical and/or water systems, and any other items not listed, are not included. You can add options to the package by selecting them.

Note about the Fridge and Cargo Slide option: the Bamboo board is not included as it cannot be utilized.

The Drive-Off version includes two longer benches with a single drawer and storage with hatches.

WHAT ARE THE UPPER CABINETS AND WORKING/STORAGE SPACE ADD-ON?

It is an option you can add to the setup, both for the Standard Black and Silver Version as well as for the Bamboo and Black Version.

It includes two additional modules mounted above the existing modules on the left-hand side. 

The left rear one includes an open shelf with a narrow panel to install electronics, plugs and small monitors on the inside and a MOLLE panel facing the outside of the camper.

The left forward one includes an adjustable shelf, accessible from the inside and the outside of the vehicle. 

Both units keep the hatches of the lower modules accessible.

CAN THE SETUP BE REMOVED?

Yes, our modules are removable although, in this case, with a bit of work to unbolt each module.

WHICH FRIDGE CAN I USE WITH THIS SETUP?

The max height of the fridge on our slide cannot exceed 410mm (16in) with a base width of 400mm (15,9in).

For example, you can fit the following fridges: Dometic CFX 3/5 35lt, Engel MT-V 35lt, ICECO APL 30lt, Ecoflow Glacier 35lt.

I HAVE A BIG FRIDGE, CAN IT FIT IN THE SETUP?

We have a solution to fit larger and taller fridges such as SnoMaster and National Luna ones. 

Contact us for more details and to check with us if the fridge you own is compatible with our setup and can be integrated into our system.   

WHERE ARE THESE PRODUCTS MADE?

All our products are designed, manufactured, assembled and tested in Italy.

WHICH MATERIALS DO YOU USE?

In our Black Raptor Birch and Silver Structure version, our modules are made of high quality aluminum profiles, DIBOND panels, marine birch, RAPTOR paint coating.

In our Bamboo and Black Structure version, our modules are made of high quality aluminum profiles powder coated in black, Dibond Panels covered with carpet, Anti-Mold Coated Bamboo.

WHAT IS THE TOTAL WEIGHT?

You are looking at around 70-100kg of total weight depending on the version/vehicle.

The LC 79 SC is the heaviest with over 130kg including all options.

DO YOU CUSTOMIZE THE SETUPS?

We have a certain degree of personalization available on a case-by-case base. 

Additional fees apply.

HOW DOES SHIPPING WORK?

We ship internationally on pallets.

Please note that shipping is not included in the price and it is calculated at checkout for many countries.

We ship internationally across Europe, Middle East and North America. Contact us for detailed quotes if you need to order multiple sets or if your country is currently not included in our automated shipping calculator (in this case checkout will not be possible).

WHAT ABOUT IMPORT TAXES AND DUTIES?

Depending on the country you are ordering from and shipping to, you will see the correct VAT or the VAT free price. If you order outside of the EU, import tax and duties are not included in the price. However, the price will be VAT free.

I AM BASED OUTSIDE OF THE EU, CAN I ORDER?

Yes, you can proceed with the order. If your country is currently not included in our automated shipping calculator (checkout is not possible), you will need to get in touch with us and we will prepare a draft order for you. We ship with Incoterms DAP and this means you will be contacted by the forwarding company with the amount to pay to release the shipment and receive it at your address. 

Please note that the price will be VAT free and therefore you will not be paying VAT or Sales taxes twice.

  • 5 stars: 5 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
P
Pal Jensen
Grate products

I have been searching for the right product for my Alu-Cab Modcap for several months. I found that Tailgategear's solution was a perfect fit for my needs. The response to my inquiries has been excellent, and the shipping and delivery were very efficient.

Now that I have installed and tested everything, I can say it works perfectly for us. I highly recommend Tailgategear to everyone.

C
Christian R.
Sturdy, stylish, perfect for the Jeep Gladiator

Searching a good setup for our Jeep Gladiator took quite some time and we were so happy when we finally found Tailgategear and their Alucab modules. The quality is amazing and the setup has exactly the right balance between storage room and space to move in between. We absolutely love it! The Tailgategear also does customization which was a big plus when it came to our custom made fridge slide to fit a different fridge than originally intended.

S
Soeren D.
super friendly, super quality

I'am absolute happy with the Quality of the Tailgate Gear, i've been this year on quite some bumpy offroad streets and the Hilux got shaken very well and there is nothing i could complain about. I got the Alucab Setup and the Hilux extraCab Seat Delete Kit. Both are working very well!

M
Matej Vinkovic
Game changer for overlanding

I have furniture installed in my canopy camper on a Toyota Hilux and I am extremely happy with the entire setup. The furniture is very practical, durable and perfectly suited for overlanding and camping. The build quality is excellent, everything feels solid and the design makes great use of the available space. It has significantly improved organization and usability during trips. A high-quality product that I would confidently recommend to anyone building a similar setup.

M
Melissa Trellert
It doesn’t get any better!

We absolutely love the quality and sleekness to our set up. There no other competitor that could accommodate what we wanted for our Gladiator/Alucab camper set up. The fridge slide was huge and we love all the matching cushions! The company staff were amazing, friendly and very good at being responsive and explaining everything to us. We highly recommend 👌

GOT QUESTIONS? Get in touch with the form below.

Sign up for our newsletter!

News, tips, awesome content and sometimes discounts!

SEARCH BY VEHICLE